Toyota Camry

1992-1997 of release

Repair and operation of the car



Toyota Camry
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
- 7. System of ignition
   7.2. Accumulator
   + 7.3. System of ignition
   + 7.4. Check of system of ignition
   + 7.5. Ignition coil
   - 7.6. Ignition distributor
      7.6.1. Installation
   7.7. Check and adjustment of a corner of an advancing of ignition
   7.8. Block of ignition (switchboard)
   + 7.9. Sensor of impulses
   7.10. System of charging
   7.11. Generator
   7.12. Check and replacement of components of the generator
   7.13. System of start of the engine
   7.14. Starter
   7.15. Traction relay
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment


f32f416a



7.6. Ignition distributor

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Disconnect electric sockets from the ignition distributor.
3. On a cover of the distributor note situation высоковольт a leg of a wire of the first cylinder.
4. Uncover the distributor and turn a bent shaft of the engine so that the rotor of the distributor was directed to the plug of a high-voltage wire of the first cylinder.
5. On the case of the distributor put the tag located opposite to a contact part of a rotor of the distributor.
6. Also note position of the case of the distributor in relation to the block of cylinders.
7. Unscrew bolts and remove the ignition distributor.
On the homepage